TOUGH BOND CONTACT ADHESIVE 50ML

TOUGH BOND CONTACT ADHESIVS 50ML IN NAIROBI , KENYA

Appearance : Brownish Yellowish

Application : Use a brush or metal scrappers to apply the adhesive

Thinning and Mixing : Adhesive supplied ready for use

Drying Time : 15 – 20 minutes

Direction for use :

• Surface to be bonded must be absolutely dry and free from dust.
• Apply the adhesive evenly over the both surface to be bonded using a brush.
• Allow to dry for approximately 10 – 20 minutes depending on temperature and humidity.
• Bring the two surfaces to be bonded together, once bonded repositioning of the two surfaces is not possible, therefore care must be taken while bonding the correct positions.
• Apply firm even pressure, an effective bond occurs immediately which becomes stronger on aging.

Warning : 

• Highly flammable mixture, do not expose near open flame and sparks. Use contents of the container in a well ventilated place.
• Irritating to eyes, respiratory system and skin, please use proper protective and clothing while applying the adhesive.
• Avoid skin contact and DO NOT inhale fumes from the solution.
• If swallowed or fumes inhaled, immediately seek medical advice.