ASMACO PLASTIC SPRAY GREY MATT

GENUINE ASMACO PLASTIC SPRAY PAINT - GREY MATT IN NAIROBI, KENYA

ASMACO PLASTIC SPRAY PAINT is specially designed to renew the appearance of indoor and outdoor plastics. No primer is required. These sprays are ideal for use on polypropylene, polystyrene, resin, PVC, fiberglass, and vinyl plastics such as chairs, garbage bin, tables, and planters. It is suitable for car bumpers, other accessories of automobiles.

KEY FEATURES:

• Bonds easily most of the plastic PVC, Resin, and many more
• No sanding or primer required
• Resistant to temperature changes.
• Excellent weather ability, strong hiding power, fast drying.
• For interior and exterior applications

APPLICATIONS:

• Renew the appearance of indoor and outdoor plastic surface.
• Ideal for chair and tables

DIRECTIONS OF USE:

Use outdoors or in a well-ventilated area. Use when temperature is between 50-90°F (10-32°C) and humidity is below 65% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist. Remove all dirt, grease, oil, salt, and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and dry with a clean cloth. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces. If mildew is present, wash with a bleach solution, rinse, and let dry. Shake can vigorously for one minute aer the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake oen during use. Hold can upright 10-16” from surface and spray in a steady back and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface and in motion while spraying. Apply 2 or more light coats a few minutes apart. Maximum adhesion is achieved in 5-7 days.

ADDITIONAL INFORMATION:

• DRY & RECOAT TIMES: Dry and recoat times are based on 70ºF and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 20-30 minutes, to handle in 1 hour and fully dry in 24 hours. Apply a second coat within 1 hour or after 48 hours.
• CLEAN-UP: When finished spraying, clear spray valve by turning can upside down and pushing spray button for 5 seconds. Cleanup wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.
• CLOGGING: If the valve clogs, twist and pull o spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening.

GENUINE ASMACO PRODUCTS IN KENYA! SAME DAY DELIVERIES ARRANGED WITHIN NAIROBI & NEXT DAY DELIVERIES COUNTRYWIDE! SOME OF THE LOCATIONS WE DELIVER TO: NAKURU, KISUMU, MOMBASA, MALINDI, ELDORET, KISII, MIGORI, MOYALE, LODWAR, MARSABIT, MARALAL, KAPENGURIA, KITALE, ISIOLO, RUMURUTI, WEBUYE, BUNGOMA, MALABA, BUSIA, MUMIAS, KAKAMEGA, SIAYA, LUANDA, BONDO, MBITA, HOMABAY, RONGO, SOTIC, BOMET, NAROK, KERICHO, KAPSABET, GILGIL, NYAHURURU, RUMURUTI, NANYUKI, MERU, THIKA, MAUA, CHUKA, LIMURU, NAIVASHA, KITUI, MUTOMO, KAJIADO, EMALI, KITENGELA, OLOITOKTOK, GARISSA, MWINGI, KIBWEZI, MTITO ANDEI, VOI, DIANI, LAMU, GARSEN, KILIFI, MTWAPA, MARIAKANI, LIMURU, KIKUYU, NGONG, KAREN, ATHI RIVER AND MANY OTHER LOCATIONS!