ASMACO ANTI-GRAVEL PROTECTIVE SPRAY

GENUINE ASMACO ANTI-GRAVEL PROTECTIVE SPRAY IN NAIROBI, KENYA

ASMACO Anti gravel aerosol is specially develop on the base of high polymer rubber and synthetic resin for the protection of automobiles and car body surface from gravel, rust, salt, and stones. It can be used for threshold, spoilers, wheel arches, front and rear aprons, door bottoms and other parts. Compatible with all kinds of paints and lacquer. It reduces the noise which is created between the road and wheel.

KEY FEATURES:

• Does not contain bitumen and asphalt
• Reliable protection from pebbles, abrasive impact of dirt, sand, petrol, oils, water, and salts.
• Resistant to temperature changes.
• Reduces noise inside a car.
• Highly adhesive.
• High spreading capacity.
• Compatible with all kinds of paints and lacquers.
• Makes car bodies last much longer.
• Spreading capacity (depending on coat thickness) is 2.5–3 м².
• Full drying time is 2 hours at t +20°C.

APPLICATION:

• Protects the lower flanks of the car body against stones and corrosion.
• The film also largely absorbs noise and vibration.
• Anti-gravel below the bumpers and side panels of cars.
• Anti-resonance product in wheel arches and undersides of cars.

DIRECTION OF USE:

• Make sure that the underside of the car is completely dry, clean and free of grease. Cover the parts that do not need a treatment.
• Shake the can for at least 3–5 min — it will make a coat homogeneous and prevent the injector from being blocked.
• Shake the can from time to time when using.
• Spray to test.
• Hold the can upright. Apply a thin coat at 25–30 cm distance. For the best effect make 2–3 thin coats with 5 min intervals.
• To clear after use, turn can pointing nozzle up and away from user and activate for 1 or 2 seconds.