AICO / MILANO 50L BELT DRIVEN ELECTRIC AIR COMPRESSOR

AICO / MILANO 50L BELT DRIVEN ELECTRIC AIR COMPRESSOR IN NAIROBI, KENYA - ML50B

  SINGLE PISTON MODEL STARTING FROM - KES29,700/-    

  DOUBLE PISTON MODEL STARTING FROM- KES34,500/-  

Your compressor arrives fully assembled and works tested ready for connection to your mains supply!

KEY SPECIFICATIONS / FEATURES:

• MODEL: AC250D / ML50B
• PRESSURE: 8 BAR | 115 PSI | 0.8 MPA
• MOTOR: 1 HP | 0.7 KW
• CAPACITY: 36L / MIN | CFM
• TANK CAP: 50L / GAL
• HEAD: 50MM
• PIECE: 1

KEY INFORMATION:

• FOUNDATIONS: Belt drive air compressors are supplied wheel mounted. The wheel mounted model absorbs vibration but should be positioned on firm level ground.
• SITING & VENTILATION: Ample access and headroom should be provided around the compressors for servicing. Adequate protection from weather must be provided. Good ventilation is vital.
• MAINS CONNECTION: The compressor should be located as close to the main supply as possible. Check that this supply is the same voltage and marked on the motor rating plate.

WARNING: THIS APPLIANCE MUST BE EARTHED